CRSM Sleeves
A Heat-Shrinked Wraparound Sleeve rated for use up to 1000 volts.
CRSM Sleeves close easily with a permanent locking system that consist of a raised rail profile and a stainless steel channel. These sleeves are made from crosslinked polyolefin, which equals or exceeds the material properties of the original cable jacket. CRSM Sleeves fit a wide range of cable sizes and have unlimited shelf life, when stored under normal conditions.
- CRSM Sleeves are qualified to ANSI C119.1 rated to ICEA electrical withstand test for 1000 volts and are RUS accepted for us as jacket restoration materials on JCN cable.
- CRSM Sleeves are for use on standard poly- or elastomeric insulated/jacketed cables or lead-jacketed cables, which may include aluminum or steel armoring.
- Use as insulation for single conductor low-voltage power cable up to 1000 volts and for jacket repair up to 35 kilo volts or for general sealing applications. All CRSM sleeves are sealant-coated.
Commonly used CRSM Sleeve sizes
CRSM supplied with a 34 mm id that shrinks down to 10 mm with lengths of 200 mm or 1200 mm
CRSM supplied with a 53 mm id that shrinks down to 13 mm with lengths of 200 mm or 1200 mm
CRSM supplied with a 84 mm id that shrinks down to 20 mm with lengths of 750 mm or 1200 mm
CRSM supplied with a 107 mm id that shrinks down to 29 mm with lengths of 1000 mm or 1200 mm
CRSM supplied with a 143 mm id that shrinks down to 36 mm with a length of 1200 mm
CRSM supplied with a 198 mm id that shrinks down to 55 mm with a length of 1200 mm
