Contact Us

We are Elite Distributors for Raychem / Tyco Electronics and
Master Distributors for Covalence Heat Shrink Sleeves
Call: 936/321-3333
Email: Stacey@jsicoatings.com or Steve@jsicoatings.com
Visit our official site: www.heatshrinksleeves.com
Pipeline Blog: blog.heatshrinksleeves.com
Showing posts with label powergel sealant. Show all posts
Showing posts with label powergel sealant. Show all posts

Friday, October 25, 2013

Gel In-Line Splice Kit (GILS)


Gel In-Line Splices (GILS)
The Gel In-Line Splice Kit (GILS) is a water resistant splice kit for power cable rated to 1000V.  Gel In-Line Splice (GILS) kits offer a state-of the-art sealed splice for both underground, buried and overhead applications.  Gel In-Line Splice (GILS) closures offer a fast and simple method for splicing, insulating, and environmentally sealing low-volage cable splices. 

The Gel In-Line Splice (GILS) closure, with PowerGel sealant, covers and seals the splice quickly and easily, saving both time and effort.  PowerGel sealant is rated to 95°C.  The Gel In-Line Splice (GILS) closure is simple to re-enter because the PowerGel sealant pulls away leaving a clean connection.  The only tools required to install the Gel In-Line Splice (GILS) closure in the field are a 5/16" allen wrench or a torque wrench and a knife. 

Small housings allow for installation of the Gel In-Line Splice (GILS) to be installed in cramped location and is water tight for use in all locations.  The connector provided with the Gel In-Line Splice (GILS) accomodates copper and/or aluminum cables. Also, Gel In-Line Splices (GILS) are UV resistant and qualified for temperatures from -40°C to 90°C.

The Gel In-Line Splice (GILS) is supplied in two sizes.
 Gel In-Line Splice - GILS-4/0 for conductor size #2-4/0
Gel In-Line Splice -GILS- 350 for conductor size #1/0-350


Gel In-Line Splice Kit (GILS) diagram



Monday, July 22, 2013

Easiest Way to Seal a Cable Splice?

     Look no further than the GHFC!  This product is rated to 1000 volts and utilizes Raychem's patented Gel-Tek technology to assure a long lasting, water proof seal.  The GHFC can be used of low voltage cable taps or splices.  GHFC is also approved for underground splicing (to ANSI C119.1); for overhead cables and is ideally made for street lighting applications.

     Once the cable is crimped and prepared; the GHFC literally takes two seconds to install.  It is just as easy as snapping your fingers!

Available in four sizes:
GHFC-1-90 
GHFC-2-90
GHFC-2.5-90
GHFC 3-90

Contact us so that we can help you select the proper size.

See an installation video and product information HERE.