Contact Us

We are Elite Distributors for Raychem / Tyco Electronics and
Master Distributors for Covalence Heat Shrink Sleeves
Call: 936/321-3333
Email: or
Visit our official site:
Pipeline Blog:

Friday, November 1, 2013

Rayvolve RVS Splice Covers

Rayvolve RVS Splice Cover
Raychem's Rayvolve RVS Splice Cover kit is a cold applied splice which are the easy "roll-on" way to insulate and seal 1/C cable connections up to 1000V.  The Rayvolve RVS Splice Cover utilizes the gripping force of the specially formulated EPDM elastomer combined with the high-performance sealant to form a water-resistant insulating sleeve.  The Rayvolve RVS Splice Cover is UL listed and CSA certified for direct burial application over in-line compression connectors. 

The Rayvolve RVS Splice Cover features a dual wall design with an entrapped lubricant, making installation fast and simple.  The Rayvolve RVS Splice Cover rolls onto the cable with minimal effort, even at temperatures below -15°F (-25°C).  The cable can be energized immediately.  It is ideal for use where gas or electric heating devices are not approved.

The Rayvolve RVS Splice Cover is RUS accepted for use as a secondary tap or splice cover and is for use on standard poly- or elastomeric-insulated cables. Use the Rayvolve RVS Splice Cover to insulate and seal in-line compression connectors or to seal terminal lugs. 

Rayvolve RVS Splice Covers Sizes are shown below:
Catalog No   Conductor Size (AWG/kcmil)
RVS-11        #8-2/0 AWG                
RVS-12        1/0-250 kcmil               
RVS-13        250-600 kcmil              
RVS-14        600-1000 kcmil            
 Note:  Confirm selection with Cable OD dimensions
 to assure proper sizing 

Each Kit contains one Rayvolve RVS Splice cover sleeve and sealant strip.  Kits do not contain connectors.  For stub connection, see Rayvolve RVC Splice Cover kit.

No comments:

Post a Comment