Contact Us

We are Elite Distributors for Raychem / Tyco Electronics and
Master Distributors for Covalence Heat Shrink Sleeves
Call: 936/321-3333
Email: or
Visit our official site:
Pipeline Blog:

Monday, March 6, 2017

Raychem HVT-Z-80-G/SG


     Joint Specialists is now stocking HVT-Z-80-G/SG.  We keep a number in stock (and about 50 other Tyco Electronics / Raychem products) so feel free to check with us for current inventory levels.  We do ship most of our items same day from our warehouse in Conroe, TX.  

     Going to start a series where I highlight / spotlight one Raychem / Tyco Electronics product each day.  Today we are looking HVT-Z-80.  

     First the product summary:  5/8 kV, 1/C indoor/outdoor termination kit for copper tape, wire shield, and unishield cables.  

     Nominal use range:  #4 - #1 AWG 5kV or #6-#2 AWG for 8kV.  
     Insulation OD Range: .35-.60" (9-15mm)
     Max Cable Jacket Diam: .95" (24mm)
So, what comes in a kit?   
This is the kit you get when you buy an HVT-Z-80-G/SG
Let's take a closer look at this though, breaking down into smaller pictures:
Raychem 32/10
Raychem Red non-Tracking Tube and 2 Red Mastic Strips

Strips of copper backed tape
1 Yellow Angle-cut mastic strip and 2 strips of copper backed tape

solder-blocked braid
Solder blocked braid and a ground clamp spring
     That is what you will get every time you order a single HVT-Z-80-G/SG.  

     Now let's take a look at an installation video for HVT-Z (not 80)

No comments:

Post a Comment