Contact Us

We are Elite Distributors for Raychem / Tyco Electronics and
Master Distributors for Covalence Heat Shrink Sleeves
Call: 936/321-3333
Email: Stacey@jsicoatings.com or Steve@jsicoatings.com
Visit our official site: www.heatshrinksleeves.com
Pipeline Blog: blog.heatshrinksleeves.com

Monday, April 21, 2014

3/C In-Line PILC Splices


HV-3-1590S/HVS-3-2590S

3/C In-Line Splices for PILC Cable (15-25 kV)

TE Connectivity Raychem 3/C in-line PILC splices provide a highly effective and easily installed oil
stop system, using standard heat-shrinkable components. The adhesive-lined conductive breakout
provides an oil- and pressure-resistant seal and grounds the conductive tubing to the lead sheath.
Oil barrier tubing locks the oil in the PILC cables, converting each conductor into the polymeric
equivalent.

Tested to the electrical and load cycling requirements of IEEE 404 For use on paper-insulated, leadcovered
(PILC) cable, or varnished cambric-insulated, lead covered (VCLC) cable.





Selection Information:












Size Options for HVS-3-1590 Rated for use at 15 kV

HVS-3-1591 is supplied for a PILC Conductor Size range of #4-4/0 with a PILC Insulation Diameter range of 15-25 mm (A). The Maximum Connector O.D. is 23 mm (C) and the Maximum Connector Length is 
89 mm (D).

HVS-3-1592 is supplied for a PILC Conductor Size range of 250-350 with a PILC Insulation Diameter range of 22-28 mm (A). The Maximum Connector O.D. is 29 mm (C) and the Maximum Connector Length is 89 mm (D).

HVS-3-1593 is supplied for a PILC Conductor Size range of 500-750 with a PILC Insulation Diameter range of 27-38 mm (A). The Maximum Connector O.D. is 41 mm (C) and the Maximum Connector Length is 127 mm (D).

HVS-3-1594 is supplied for a PILC Conductor Size range of 750-1000 with a PILC Insulation Diameter range of 29-44 mm (A). The Maximum Connector O.D. is 47 mm (C) and the Maximum Connector Length is 152 mm (D).



Size Options for HVS-3-1590S "Shorty"Rated for use at 15 kV

HVS-3-1591S is supplied for a PILC Conductor Size range of #2-350 with a PILC Insulation Diameter range of 17-25 mm (A). The Maximum Connector O.D. is 22 mm (C) and the Maximum Connector Length is 76 mm (D).

HVS-3-1592S is supplied for a PILC Conductor Size range of 4/0-600 with a PILC Insulation Diameter range of 22-32 mm (A). The Maximum Connector O.D. is 30 mm (C) and the Maximum Connector Length is 102 mm (D).

HVS-3-1593S is supplied for a PILC Conductor Size range of 500-1000 with a PILC Insulation Diameter range of 25-38 mm (A). The Maximum Connector O.D. is 38 mm (C) and the Maximum Connector Length is 127 mm (D).



Size Options for HVS-3-2590E Rated for use at 25 kV

HVS-3-2591E is supplied for a PILC Conductor Size range of #1-350 with a PILC Insulation Diameter range of 22-29 mm (A). The Maximum Connector O.D. is 29 mm (C) and the Maximum Connector Length is 102 mm (D).

HVS-3-2592E is supplied for a PILC Conductor Size range of 350-750 with a PILC Insulation Diameter range of 28-32 mm (A). The Maximum Connector O.D. is 36 mm (C) and the Maximum Connector Length is 25 mm (D).

No comments:

Post a Comment