Contact Us

We are Elite Distributors for Raychem / Tyco Electronics and
Master Distributors for Covalence Heat Shrink Sleeves
Call: 936/321-3333
Email: Stacey@jsicoatings.com or Steve@jsicoatings.com
Visit our official site: www.heatshrinksleeves.com
Pipeline Blog: blog.heatshrinksleeves.com

Monday, April 21, 2014

Deadbreak Connecting Plug


Deadbreak Connecting Plug

600/900 Amp 15/28 -35 kV Class

Raychem 600/900A deadbreak connecting plug is available in both 15/28 kV and 35 kV class
versions. The connecting plug is meant to connect two or more 600/900A deadbreak elbows.
Typical applications are as a separable cable splice, circuit reconfiguration, or as an expandable,
submersible junction.

900A ratings are achieved by ordering the copper version, but require copper cable and other copper
constructed components.

A fully shielded, submersible connection is offered with conformance to IEEE Standard 386. These
standoff plugs are therefore interchangeable with other manufacturers’ products that also comply
with this standard.
  • 15/28 kV or 35 kV, 600 or 900A ratings available
  • Fully submersible
  • Industry standard 5/8"- 11 threaded stud used for electrical connection
  • Available in either Aluminum or Copper
  • Conforms to ANSI/IEEE Standard 386




 
15/28 kV Deadbreak Connecting Plug Ratings
Voltage Class...15/28 kV
Max. Rating Phase-to-Ground... 16.2 kV
Max Rating Phase-to Phase... 28 kV
AC 1 minute withstand... 45 kV
DC 15 minute withstand... 88 kV
BIL and full wave crest... 140 kV
Minimum Corona Level... 21.5 kV (3pC)
Continuous... 600/900A rms
24 Hour Overload:... 1,000A rms

35 kV Deadbreak Connecting Plug Ratings
Voltage Class...35 kV
Max. Rating Phase-to-Ground... 21.1 kV
Max Rating Phase-to Phase... 36.6 kV
AC 1 minute withstand... 50 kV
DC 15 minute withstand... 103 kV
BIL and full wave crest... 150 kV
Minimum Corona Level... 26 kV (3pC)
Continuous... 600/900A rms
24 Hour Overload:... 1,000A rms


 Selection Information:

Common Deadbreak Connecting Plug Options:
ELB-15/28-600-CP-AL is an Aluminum Deadbreak Connecting Plug with a voltage class of 15/28 kV and a current rating of 600.
ELB-35-600-CP-AL is an Aluminum Deadbreak Connecting Plug with a voltage class of 35 kV and a current rating of 600.
ELB-15/28-600-CP-CU is a Copper Deadbreak Connecting Plug with a voltage class of 15/28 kV and a current rating of 600/900.
ELB-35-600-CP-CU is a Copper Deadbreak Connecting Plug with a voltage class of 35 kV and a current rating of 600/900.







No comments:

Post a Comment